HOME ABOUT PRODUCTS NEWS STRENGTH FEEDBACK CONTACT 中文

Tel：+86-13373482802  Mr.Wu

E-mail：wangfang@ruiguangfrp.cn

Add：Jizhou Industrial Park, Hengshui ,Hebei, China.

NEWS CENTER

Company news

Company news

Industry news

Industry news

Acid and alkali resistance and corrosion resistance of FRP grids
Acid and alkali resistance and corrosion resistance of FRP grids

Acid and alkali resistance and corrosion resistance of FRP grids

Release time：
2019-01-19
Abstract：
Among many functions of FRP grids, acid and alkali resistance and corrosion resistance are the most outstanding features. And for some occasions with high corrosiveness, such as chemical plants, there are many corrosive gases, liquids and other organic solvents, so the demand for grilles is higher than that of other factories. Generally, the minimum requirement of grids used in chemical plants is 3.8 cm thick. If the requirement is not met, 5.0 cm thick grids or 6.0 cm grids can be selected. 2.5 cm thick grille panels used in community walkways, garden walkways and factory staircase pedals are seldom used in chemical plants. Since grilles are mainly used as operating channels in chemical plants, it is necessary for safety to meet demand.
Simple two-step identification of quality of FRP grids
Simple two-step identification of quality of FRP grids

Simple two-step identification of quality of FRP grids

Release time：
2019-01-19
Abstract：
Today, I'll teach you two tricks. I'll teach you two simple steps to distinguish the quality of FRP grids.First, from the side of the FRP grille or the inside of the aperture, we can see whether the drawing of the FRP grille is even. If the root of the drawing of the grille is distinct, then the quality of the grille is good. Also, we can see that the number of air holes on the frontal surface of the grille is small, which can also see whether the resin casting of the FRP grille is even.
When will FRP grids break?
When will FRP grids break?

When will FRP grids break?

Release time：
2019-01-19
Abstract：
Fiberglass reinforced plastics (FRP) grids have not only high load-carrying capacity, but also high toughness. They will not deform even under heavy impact or pressure. However, if the ultimate load-carrying capacity of FRP grids is exceeded, fracture will occur. Some time ago, a customer like our manufacturer consulted if in the normal use of the case, FRP grille resin and fiberglass yarn more serious dispersion will occur fracture, what is the reason?
Appearance and Surface Treatment of FRP Grid
Appearance and Surface Treatment of FRP Grid

Appearance and Surface Treatment of FRP Grid

Release time：
2018-12-06
Abstract：
The appearance of FRP grille is rectangular network distribution, the color has yellow, green, red, grey, blue, white and other colors. One side of the grille is flat, the other is not flat. The grille on the surface is crescent. The reason is that in the production of FRP grids, they need to be molded, so the surface will appear crescent grooves. Because of this, it has a high wear resistance, according to the needs of customers, our manufacturers can also grind it.